Thermo Tech Inc. - We manufacture expansion joints, connectors, hoses and pipe guides

Thermo Tech, Inc. quality piping expansion, movement, and vibration “Problem Solvers” are in service in power plants, industrial facilities,
and in heating and cooling systems all over North America. Special end fittings, lengths, and pressure ratings for your application available on request. Contact the factory with your needs.

Engineered to protect your piping system from vibration and thermal expansion and contraction, our sanitary products are designed with a smooth inner surface. These sanitary connectors and hoses are ideal for Clean-In-Place (CIP) systems. They meet or exceed FDA and USDA standards.

Phone:   888.533.9988
              303.698.9988
Fax:        303.698.2184

Email
bens@thermotechdenver.com
Technical Assistance:
bens@thermotechdenver.com

Sanitary Transfer Hoses


	Sanitary Expansion Joint		Sanitary Flexible Connector		Sanitary Connector Vibration Control		Sanitary Hose Food Grade Silicone

	Sanitary FlexFlo Transfer Hose		Sanitary Teflon Hose Connectors

FlexFlo, White Cover, Sanitron Crush-Resistant Transfer Hose meets or exceeds FDA, USDA, 3A and PMO standards

250 PSI working pressure
230°F maximum temperature
Available in lengths up to 100 feet and diameters 1” through 4”
Springs back when crushed

DOWNLOAD PDF SPEC SHEET

FlexFlo, Grey Cover, Sanitary Transfer Hose meets or exceeds FDA, USDA and 3A standards

150 PSI working pressure
220°F maximum temperature
Available in lengths up to 100 feet and diameters 1 1/2” through 4”

DOWNLOAD PDF SPEC SHEET

FlexFlo Sanitron Transfer Hose assemblies provide full inside diameters, no restrictions and no areas of entrapment. There is a smooth transition from hose to stainless steel end fitting. The hose and end fitting assemblies are designed to mate with existing piping systems and processing equipment in food, dairy, beverage, chemical, and pharmaceutical transfer applications.

Hoses are fabricated to your required length and are available with clamp type, bevel seat and nut, cam lock, flanged, threaded or butt weld ends in 304 and 316 stainless steel.

You will need Adobe Reader installed on your computer to view our Spec Sheets. Most computers will have this program already installed. If you need a free copy please follow this link.